How to Choose and Set Up a Portable Solar Panel Stand for Flat Roofs | Aisinee

Unlike sloped roofs, flat roofs offer easy access and a larger, unobstructed space. However, traditional Solar Panel Holder can be complicated and can’t be moved. This has made portable solar panel stands important.

1: How to Choose the Right Portable Solar Stand

① Consider weight distribution and ballast

The important rule for flat roofs is non-penetration. Ballast Solar Panel Mounting rely on ballast weight to well support the solar panels. A ballasted steel plate with a wide, stable base and a system that allows for safe, distributed weight loading that won’t damage the roof.

2:Check by yourself: What is the safe weight capacity of your roof?

Wind Resistance

Solar Panel Installation Flat Roof can be exposed to strong winds. Your stand must be engineered to withstand the wind load. Key features to look for include:

①Lower tilt angles: The ability to lower the tilt angle in stormy seasons reduces wind uplift.

②Wind defector: Corrosion resistant wind defector to put at the back of the solar structure.

③Professional strength calculation report: Aisinee do the calculation based on the Japan JIS standards.

3.A Guide to Setting Up Your PV Stand

After you choose the right mounting system from Aisinee, follow below steps for a safe and successful installation.

Safety First: Make sure you’re not alone, always have a helper.

What You'll Need: Your portable solar stand kit, solar panels, inverters, batteries, cables, ballast weights, a screwdriver (if required), and a measuring tape.

Plan Your Layout: Identify the sun spot on your roof to avoid shadows.

Ensure there is enough space around the array for maintenance and safe access.

Position and Add Ballast based on the solution drawing and the installation manual.

 For any inquiry for solar panel mounting system, pls contact us,E-mail: sales@aisinee.com, Whatsapp / Wechat Skype: +86 18959208931, thanks.